Need help?Do you have a question about the Strymon DECO and is the answer not in the manual?
Details VOICE, SATURATION, TONE, VOLUME, and TAPE SATURATION ON controls.
Explains TYPE, LAG TIME, BLEND, WOBBLE, and DOUBLETRACKER ON controls.
How to activate the Auto-Flange effect by holding the Doubletracker footswitch.
How saturation varies with input signal levels and pickup types.
Covers settings for Tape Flange, Chorus, Slapback, and Tape Echo effects.
Details MONO/STEREO input selection and stereo/mono output connections.
Explains USB, 9VDC power, and the EXP/MIDI jack functions.
How to set the sweep time for the Auto-Flange effect.
How to apply a high pass filter to reduce low-end frequencies.
Adjusts volume boost or cut for the Doubletracker effect.
How to create a wide stereo image using the deck outputs.
Configures Deco to sync echo repeats with MIDI Clock messages.
Sets whether Deco responds to MIDI Expression CC# 100.
Tailors the Tape Saturation range for different input signal levels.
Chooses between True Bypass and Buffered Bypass modes.
Selects the function of the rear panel EXP/MIDI jack.
Guides setting up a TRS expression pedal to control effect parameters.
Connects a switch to store and recall favorite settings.
Connects a momentary footswitch to tap in Lag Time tempo.
Configures Deco for remote preset access with MultiSwitch Plus.
Selects and saves Deco presets using the MultiSwitch Plus.
Explains connecting MIDI controllers to load presets and control functions.
How to save current pedal settings to preset locations via MIDI.
Details preset locations, banks, and MIDI Program Change assignments.
Lists MIDI CC numbers for controlling Deco parameters.
Restores the pedal to its factory default power-up modes and functions.
Lists the default configurations for various pedal settings.
Specifies the required rating for the power adapter.
How to access and adjust global parameters and functions.
Details EXP/MIDI Jack Mode, MIDI Channel, and MIDI Out Mode settings.
Outlines the two-year limited warranty for material and workmanship.
Lists conditions and damages not covered by the warranty.
Defines limitations on purchaser recourse and Strymon's liability.
Provides instructions for obtaining warranty repair service.
General| Type | Tape Saturation & Doubletracker |
|---|---|
| Bypass | True Bypass (electromechanical relay switching) |
| MIDI | No |
| Inputs | 2 x 1/4" |
| Outputs | 2 x 1/4" |
| Power Source | 9V DC |
| Power Usage | 250mA |
| Controls | Saturation, Blend, Lag Time, Wobble |
To Next Page
