Need help?Do you have a question about the Strymon DIG and is the answer not in the manual?
Details the primary controls and their functions on the front panel.
Configures the input for mono or stereo signals.
Describes the multifunction EXP/MIDI jack and its modes.
Adjusts the level of the dry signal manually within Live Edit.
Sets the dual delay configuration to Series, Ping Pong, or Parallel.
Enables or disables time sync and subdivisions between delays.
Sets a Tap Tempo subdivision for Delay 1.
Selects the input level routed to the effect processing.
Sets the pedal to True Bypass or Buffered Bypass mode.
Sets the function of the rear panel EXP/MIDI jack.
Configures a TRS expression pedal to control DIG's parameters.
Stores and recalls favorite settings using an external switch.
Sets the master delay time using an external momentary switch.
Sets up DIG for MIDI control and preset management.
Saves current pedal settings to DIG's preset locations via MIDI.
Details preset selection via MIDI Program Change messages.
Lists MIDI CC numbers for controlling DIG parameters.
General| Stereo | Yes |
|---|---|
| Bypass Switching | True Bypass (electromechanical relay switching) |
| Current Draw | 300mA |
| Type | Digital Delay |
| Inputs | 2 x 1/4" |
| Outputs | 2 x 1/4" |
| Power Source | 9V DC power supply |
| Dimensions | 4.5" x 4" x 1.75" |
| Controls | Mix |
| Weight | 0.9 lbs |
To Next Page
