pg 16
DIG - dual digital delay
Live Edit Functions
Respond/Ignore MIDI Expression
When set to MIDI mode, this setting determines whether DIG will
respond to MIDI Expression CC# 100, values 0 (heel) to 127 (toe), to
control the knob settings in the same manner as a TRS Expression
pedal�
1 Press and hold the ON footswitch� Once both LEDs flash, release the
footswitch�
2 Set the position of the MOD (MIDI EXP) switch to select whether DIG
will respond to MIDI Expression CC# 100� Both LEDs will momen-
tarily change color to indicate the current status as you set the switch�
• Set the switch down to deep for Disabled: both LEDs light RED -
DIG will not respond to MIDI Expression�
• Set the switch up to off for Enabled: both LEDs light BLUE (de-
fault) - DIG will respond to MIDI Expression�
3 Press the ON footswitch to exit and store your MIDI Expression setting�
NOTE: The MIDI Expression setting is saved per Favorite setting or MIDI
preset�
To Next Page
Loading...
