Need help?Do you have a question about the Strymon El Capistan dTape Echo and is the answer not in the manual?
Selects the tape machine or head configuration for the effect.
Adjusts the delay time based on the selected tape head type.
Controls tape bandwidth, simulating wear over time.
Sets delay time by tapping; long press for infinite repeats.
Changes El Capistan's operation based on tape head settings.
Balances dry and wet signal levels, from 100% dry to 100% wet.
Controls mechanical speed fluctuations for tape warble effect.
Varies the number of delay repeats, from single to oscillation.
Engages or disengages the effect; LED indicates active status.
High impedance mono or TRS stereo input, configurable via jumper.
Left output used for mono operation; both for stereo.
Requires 9VDC center negative adapter, 250mA minimum.
Connect TRS expression pedal for continuous control over parameters.
Mixes integrated spring reverb with delay repeats.
Shapes the low frequency content of echo repeats.
Adjusts tape bias for varying echo volume and repeat character.
Controls tape irregularities like friction and splices.
General| Type | Delay |
|---|---|
| Technology | Digital |
| Analog Dry Path | Yes |
| Maximum Delay Time | 2.5 seconds |
| Feedback | Yes |
| Modulation | Yes |
| MIDI | No |
| Input Impedance | 1 MOhm |
| Power Supply | 9V DC |
| Bypass | True Bypass |
| Weight | 1.5 lbs |
| Controls | Time, Mix, Repeats, Tape Age, Wow & Flutter |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Output Impedance | 1 kOhm |
To Next Page
