Need help?Do you have a question about the Strymon Flint and is the answer not in the manual?
Controls for the tremolo effect: mode, intensity, and speed adjustments.
Controls for the reverb effect: type, mix, decay, and color settings.
Specifies mono/stereo input signal connection options.
Details USB for MIDI/firmware and EXP/MIDI jack functions.
Specifies power adapter requirements: 9VDC, center negative, 300mA min.
Adjusts +/- 3dB volume boost or cut for the Tremolo effect.
Adjusts +/- 3dB volume boost or cut for the Reverb effect.
Sets tap tempo note sub-division for the Tremolo LFO.
Selects signal path: Reverb into Tremolo or Tremolo into Reverb.
Adjusts time between dry sound and reverb onset for space emulation.
Determines if Tremolo Speed syncs to incoming MIDI Clock messages.
Controls response to MIDI Expression CC#100 for knob control.
Selects input level routing for effect processing (Instrument or Line).
Sets pedal to True Bypass or Buffered Bypass mode.
Allows wet reverb signal to "spill" into bypass or the next preset.
Sets the function of the EXP/MIDI jack (Expression, Favorite, Tap, MIDI).
Guides setting up a TRS expression pedal to control Flint's knobs.
Connects a footswitch to store and recall favorite settings.
Connects a footswitch to tap in the tremolo speed.
Sets up Flint and MultiSwitch Plus for remote preset access.
Explains selecting and saving Flint presets with MultiSwitch Plus.
Unlocks tools for loading presets via MIDI controller/interface.
Configures MIDI channel and MIDI Out mode for communication.
Details saving current pedal settings to Flint's 300 preset locations.
Explains preset locations (0-299) and MIDI patch banks.
Lists MIDI CC numbers and their corresponding parameters and ranges.
Restores pedal to factory defaults, including presets and settings.
Lists default EXP/MIDI Jack, Input Level, Bypass Mode, MIDI settings.
Covers input/output impedance, A/D & D/A, input level, signal/noise, bypass type, and dimensions.
Details power adapter requirements: 9VDC, center negative, 300mA min.
Explains accessing global parameters via power-up procedure.
Details power-up options for EXP/MIDI jack mode, MIDI channel, and MIDI out mode.
General| Effect Types | Reverb, Tremolo |
|---|---|
| Stereo Input/Output | Yes |
| MIDI | No |
| Current Draw | 250mA |
| Input Impedance | 1M Ohm |
| Output Impedance | 100 Ohm |
| Tremolo Types | Harmonic, Photocell |
| Bypass | True Bypass |
| Inputs | 2 x 1/4" |
| Outputs | 2 x 1/4" |
| Power Source | 9V DC power supply |
| Dimensions | 4.5" x 4" x 1.75" |
| Power Requirements | 9V DC, center-negative |
To Next Page
