Need help?Do you have a question about the Strymon Volante and is the answer not in the manual?
Controls analog preamp gain and selects magnetic media types.
Controls media irregularities, low-frequency shaping, and high-frequency wear.
Adjusts feedback, panning, volume, and repeats for playback heads.
Adjusts head spacing and details different spacing types.
Controls delay time at head 4 and media speed.
Sets overall delay level and controls integrated spring reverb.
Details audio input/output jacks and the INST/LINE switch.
Explains MIDI IN and MIDI OUT ports and functionality.
Describes configuration options for the EXP jack (Expression, TAP, Preset, Speed, Transport).
Details using the USB port for computer MIDI control.
Specifies the correct power adapter rating for the unit.
Explains activating/bypassing, infinite repeats, and tap tempo.
Guide to recalling, choosing, and saving favorite presets.
Introduction to SOS mode and its footswitch functionality.
Details on recording, playback, and loop manipulation in SOS mode.
Advanced tips for SOS mode like Infinite Hold, Reverse, and Pause.
Adjusting parameters like MIDI Clock, SOS levels, and Pause Ramp Speed.
Controls response to MIDI Expression CC #100 using LOW CUT.
Guide to configuring and using an expression pedal.
Accessing global parameters and functions via power-up.
Setting MIDI channel, TRS MIDI output, and EXP jack modes.
Enabling/disabling MIDI Program Change and CC messages.
Configuring bypass type, spillover, kill dry, and output sum.
Steps to restore the pedal to its factory default settings.
Explains preset grouping into banks and loading presets.
Lists CC numbers for parameters like Type, Echo Level, Rec Level, Mechanics, Wear.
Lists CC numbers for Pan, SOS, Footswitches, Bypass, and other parameters.
Details signal routing for Mono In/Out and Mono In/Stereo Out.
Explains Stereo In/Stereo Out and Stereo In/Mono Out (Sum Mode).
Schematic representation of the pedal's signal paths.
Shows knob settings for presets like Middle In, Head-on, High Pass Tape, Silken Sea.
Shows knob settings for presets like Tape 123, Studio Regen, 3 Headed Drum, Tape Dreams.
Details warranty terms, exclusions, and liability limits.
Instructions on how to obtain warranty service and support.
General| Outputs | 2 x 1/4" (L/R) |
|---|---|
| Current Draw | 300mA |
| Looper Function | Yes |
| Sound-on-Sound Mode | Yes |
| MIDI | In, Out |
| Other I/O | 1 x 1/4" (expression pedal) |
| Bypass Switching | True Bypass, Buffered Bypass (selectable) |
| Power Source | 9V DC power supply (included) |
| Delay Types | Drum, Tape, Studio |
| Weight | 1.5 lbs |
To Next Page
