Strymon COMPADRE - User Manual

USER MANUAL

Summary

Controls and Connections - Front Panel

Controls and Connections - Rear Panel

Rear Panel Power Input

Connects the included power supply or an adapter.

Power Up Modes - Bypass Mode

Power Up Modes - FAV;MIDI Jack Options

External Control - MultiSwitch Plus Setup

MIDI Functionality - Configuring to Use MIDI

MIDI Configuration FAV;MIDI Jack Mode

Sets the FAV/MIDI jack mode to MIDI for external control.

MIDI Configuration MIDI Channel

Determines the MIDI channel for sending and receiving data.

MIDI Configuration Output Mode

Determines whether Compadre sends MIDI data out.

MIDI Functionality - Saving Presets

Factory Reset

Specifications

Power Adapter Requirements

Specifies the required voltage, polarity, and current for the power adapter.

Strymon Non-Transferrable Limited Warranty

Warranty Details

Details the product warranty coverage and period.

Exclusions and Liability Limits

Outlines warranty exclusions and limitations on liability.

How to Obtain Service

Provides instructions for obtaining warranty service and support.

Strymon COMPADRE Specifications

General

Bypass	True Bypass (electromechanical relay switching)
Current Draw	100mA
Type	Compressor and Boost Pedal
Power	9V DC
Input Impedance	1M Ohm
Output Impedance	100 ohm
Power Requirements	9V DC center-negative
Controls	Boost Level
Dimensions	4.5″ x 4″ x 1.75″