COMPADRE - Dual Voice Compressor & Boost
pg 17
MIDI Functionality - Saving Presets
Send the unit a MIDI Program Change message from the
connected MIDI device. The BOOST LED will flash and Compadre
will save the current state of the pedal to that preset location.
Press the BOOST footswitch to save the current state of the
pedal to the currently loaded preset location.
Press the COMP footswitch to cancel the save operation.
To enter SAVE mode,
press and hold the
BOOST footswitch. The
BOOST LED will blink
BLUE to indicate that it
is waiting to receive a
MIDI Program Change
message.
1
2
When in MIDI mode, the current state of the pedal can be saved to
any of Compadre’s 300 preset locations at any time.
OR
OR
To Next Page
Loading...
