COMPADRE - Dual Voice Compressor & Boost
pg 12
External Control – MultiSwitch Plus Setup (cont.)
Selecting and saving Compadre presets using MultiSwitch plus.
Step on a switch that is not illuminated to recall the
corresponding preset.
Step on an illuminated switch to bypass Compadre.
Saving Compadre presets with MultiSwitch Plus:
Dial in the sound that you would like to save as your preset
on Compadre.
Press and hold the BOOST footswitch on Compadre until the
BOOST LED blinks BLUE.
Press the A, B, or C footswitch on MultiSwitch Plus to save
the current state of the pedal to the desired location.
Preset 1 Preset 2 Preset 3
1
1
2
2
3
NOTE: Footswitches A, B, and C on MultiSwitch Plus
correspond to MIDI program changes 1, 2, and 3.
To Next Page
Loading...
