COMPADRE - Dual Voice Compressor & Boost
pg 13
MIDI Functionality - Configuring to Use MIDI
Using MIDI unlocks a set of tools that can be used to load any of
Compadre’s 300 preset locations using a suitable MIDI controller or
interface connected to Compadre’s FAV/MIDI jack. This requires a MIDI
controller/interface with at least one quarter-inch output or a Strymon
MIDI EXP cable. When using a Strymon MIDI EXP Cable, the MIDI OUT
mode must be set to OFF.
Check strymon.net/support/compadre for a list of compatible devices.
OR
MIDI Enabled Stompbox
MIDI Controller with
5-pin MIDI Outputs
MIDI Controller with
1/4” TRS Output
MIDI 1/4”
TRS Interface
MIDI EXP cable TRS cable
OR
To Next Page
Loading...
