Need help?Do you have a question about the Strymon BRIG and is the answer not in the manual?
Details function of VOICE, TIME, FILTER, REPEATS knobs.
Explains LED Indicator, MIX, MOD, and FOOTSWITCH functions.
Describes using footswitch to enter and set delay time via tap tempo.
Details I/O Mode Selector settings for mono and stereo operation.
Illustrates and explains use of TS and TRS cables for I/O.
Explains selecting True Bypass or Buffered Bypass during power-up.
Describes setting Spillover Mode to allow wet signal in bypass.
Details the three Dry Signal options: Digital, Analog, and Kill Dry.
Describes configuring EXP/MIDI jack for various external control modes.
Details MIDI Mode functionality for MultiSwitch Plus and MIDI controllers.
Explains how Brig syncs its delay time to incoming MIDI Clock.
Guides on setting up an expression pedal to control Brig's parameters.
Explains connecting and using a switch to store/recall Favorite settings.
Details configuring Strymon MiniSwitch jumper for Tap/Infinite modes.
Explains setting up external momentary switch for Tap Tempo.
General| Delay Type | Analog |
|---|---|
| Bypass | True Bypass (electromechanical relay switching) |
| Input Impedance | 1M Ohm |
| Analog Dry Path | Yes |
| Type | Delay |
| Controls | Time, Mix |
| Power Source | 9V DC |
| Output Impedance | 100 Ohm |
| Technology | Bucket Brigade Device (BBD) |
To Next Page
