Strymon BRIG - Configuring the EXP;MIDI Jack Modes

pg 13
Power Up Modes
Configuring the EXP/MIDI Jack
1 Press and hold the FOOTSWITCH for at least 2 seconds while powering
up Brig� Once the LED flashes RED, release the footswitch�
TIME VOICE MIX
FILTER MODREPEATS
hold (tap)
dBucket Delay
3205
multi
3005
2 Turn the MIX (EXP/MIDI JACK) knob to select the function of the rear
panel’s EXP/MIDI jack� The LED will change color to indicate the
current status as you turn the knob�
• Expression Pedal Mode: GREEN (default, minimum) - Using a
standard TRS expression pedal, allows continuous control over
any of the knobs� (See page 16 for details�)
• Favorite Mode: AMBER (11 o’clock) - Using a Strymon MiniSwitch,
allows you to recall a Favorite setting� (See page 17 for details�)
• Tap Mode: RED (12 o’clock) - Using a Strymon MiniSwitch, allows
you to tap in a tempo in quarter notes for your delay repeats to
follow� (Also, see the FOOTSWITCH description on page 4 for
note division options�)
• Infinite Mode: PURPLE (2 o’clock) - Using a Strymon MiniSwitch
allows for infinite delay repeats of the input signal—essentially the
same as turning the REPEATS knob to maximum� (See page 19
for configuration details�)
(Continued, next page )