pg 23
Configuring MultiSwitch Plus for Brig
Configure MultiSwitch Plus for use with Brig for either PRESET Mode
for preset selection or CUSTOM Mode for TAP - FAVORITE - INFINITE
control�
1 Connect a TRS cable to Brig’s EXP/MIDI jack�
2 For PRESET Mode - Press and hold the A footswitch on MultiSwitch
Plus while connecting the other end of the TRS cable to any one of
the three jacks� The three LEDs on MultiSwitch Plus will blink GREEN
when you release the A footswitch�
OR
For CUSTOM Mode -Press and hold the C footswitch on MultiSwitch
Plus while connecting the other end of the TRS cable into one of the
three jacks� The three LEDs on MultiSwitch Plus will blink GREEN
when you release the C footswitch�
To Next Page
Loading...
