Strymon BRIG - External Control; Syncing to MIDI Clock

pg 15
External Control
Syncing to MIDI Clock for Delay Time
Once configured for MIDI Mode, Brig will automatically respond to MIDI
Clock when received via the EXP/MIDI jack, allowing Brig’s delay time to
be synced to the incoming MIDI Clock BPM�
While synced to MIDI Clock, you can optionally use the TIME knob to
select a TAP DIVISION for the incoming clock tempo� The options
available, from minimum to maximum on the knob, are:
TRIPLET, EIGHTH, DOTTED EIGHTH, and QUARTER note�
TIME
NOTE: Incoming MIDI Clock will also be sent to Brig’s MIDI Out when the
MIDI Out is set to THRU� See page 30�