pg 17
External Control
Favorite Switch Setup and Compare Mode
Connect MiniSwitch or other external latching footswitch to store and
recall your Favorite setting�
NOTE: Your Strymon MiniSwitch’s internal jumper switch must be set to the
factory-default FAV/BOOST Mode setting for Favorite Switch functionality�
If you’ve changed the setting of this jumper switch, you’ll need to change it
back to FAV/BOOST Mode—see page 19�
1 Configure the EXP/MIDI jack for Favorite Mode� (See page 13 for
more info�)
2 Connect your MiniSwitch (or, optionally, an external latching switch
with a TRS cable) to the EXP/MIDI jack�
OR
3 Dial in your desired sound�
4 To save your sound as the new Favorite setting, press and hold the
Brig footswitch for at least 3 seconds, until the LED blinks GREEN�
Then, press and hold the Brig footswitch until the LED lights BLUE to
save the Favorite setting�
Step on the external footswitch to toggle between your current and
Favorite settings on Brig�
To Next Page
Loading...
