pg 31
MIDI Functionality (continued)
Saving Presets in MIDI Mode
When in MIDI Mode, the currently loaded settings can be saved to any of
Brig’s 300 preset locations at any time�
1 To enter Save Mode, press and hold the
FOOTSWITCH
for at least 3
seconds, until the LED blinks GREEN to indicate that Brig is waiting
to receive a MIDI Program Change message�
TIME VOICE MIX
FILTER MODREPEATS
hold (tap)
dBucket Delay
3205
multi
3005
2 To save the current state of the pedal to the currently loaded preset
location, press and hold the footswitch for at least 3 seconds, until the
LED lights BLUE�
OR
To save the current state of the pedal to any preset location, send
the unit a MIDI Program Change on Brig’s currently selected MIDI
channel� For example:
• Send MIDI Program Change #10 to save the preset to the
corresponding memory location on the pedal�
• To recall this preset, send MIDI Program Change #10 from your
MIDI controller or sequencer�
To Next Page
Loading...
