Need help?Do you have a question about the Strymon cloudburst and is the answer not in the manual?
Sets pedal to True Bypass or Buffered Bypass via footswitch and ENSEMBLE switch.
Allows wet reverb to spill into bypass or next preset, configured via MOD knob.
Sets dry signal to Digital, Analog, or Kill Dry mode using the TONE knob.
Configures the EXP/MIDI jack for Expression, Favorite, Freeze, Infinite, or MIDI modes.
Guides setting up a TRS expression pedal to control any knob, defaulting to MIX.
Unlocks MIDI functionality for preset loading using a MIDI controller or interface.
How to save current settings to preset locations using MIDI Program Change messages.
Restores the pedal to factory defaults and replaces presets with factory settings.
Quick guide for performing a factory reset using the footswitch and PRE-DELAY knob.
General| Type | Reverb |
|---|---|
| Technology | Digital |
| USB | No |
| Bypass Switching | True Bypass |
| Current Draw | 300mA |
| Effects | Reverb |
| Controls | Mix, Decay, Tone, Modulation |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Power Source | 9V DC power supply |
To Next Page
