Strymon cloudburst - Bypass Mode Quick Reference; Spillover Mode Quick Reference; Dry Signal Quick Reference; EXP;MIDI Jack Mode Quick Reference

pg 35
Power Up Modes - Quick Reference
Global parameters and functions can be accessed via a power up
procedure� All power up functions persist through power cycles�
1 Press and hold the footswitch for at least 2 seconds while powering
up cloudburst� Once the LED flashes, release the footswitch�
2 Adjust the desired functions with the controls noted below�
3 Press the footswitch to store your changes and exit Power Up Mode�
POWER UP MODE OPTIONS
BYPASS MODE
FOR MONO I/O
See page 8
for an illustrated
description�
Set the ENSEMBLE switch - status shown on the LED
• True Bypass: switch in the off (left) position - LED
GREEN (default)
• Buffered Bypass: switch in the (right)
position - LED RED
SPILLOVER MODE
See page 9
for an illustrated
description�
Turn the MOD knob - status shown momentarily on the
LED
• Off: AMBER (default, minimum knob position)
• ON: PURPLE (maximum knob position)
DRY SIGNAL
See page 10
for an illustrated
description�
Turn the TONE knob - status shown momentarily on the
LED
• Digital: GREEN (default, minimum knob position)
• Analog: RED (12 o’clock knob position)
• Kill Dry: BLUE (maximum knob position)
EXP/MIDI JACK
MODE
See page 11
for an illustrated
description�
Turn MIX knob - status shown on the LED
• Expression: GREEN (default, minimum knob position)*
• Favorite: AMBER (11 o’clock knob position)
• Freeze: RED (12 o’clock knob position)
• Infinite: PURPLE (2 o’clock knob position)
• MIDI: BLUE (maximum knob position)
MIDI CHANNEL
See page 22
for an illustrated
description�
Turn DECAY knob - status shown on the LED
• 1: GREEN (default, minimum knob position)
• 2: AMBER (10 o’clock knob position)
• 3: RED (12 o’clock knob position)
• 4-16: BLUE (maximum knob position) - channel set
by next received MIDI Program Change message
*NOTE: Also see “Expression Pedal Setup” on page 13 to configure your
pedal functionality per preset�