pg 19
External Control
Using MultiSwitch Plus
Selecting and saving cloudburst presets using MultiSwitch Plus�
NOTE: Footswitches A, B, and C on MultiSwitch Plus correspond to MIDI
Program Changes 1, 2, and 3�
1 Step on a switch that is not illuminated to recall the corresponding
preset�
2 Step on an illuminated switch to bypass cloudburst�
Saving cloudburst Presets with MultiSwitch Plus:
1 Dial in the sound that you would like to save as your preset on
cloudburst�
2 Press and hold the cloudburst footswitch for at least 2 seconds, until
the LED blinks GREEN�
3 Press the A, B, or C MultiSwitch Plus footswitch to save the current
state of the pedal to the desired location�
To Next Page
Loading...
