pg 25
MIDI Functionality (continued)
Saving Presets in MIDI Mode
When in MIDI Mode, the currently loaded settings can be saved to any of
cloudburst’s 300 preset locations at any time�
1 To enter Save Mode, press and hold the footswitch for at least 2
seconds, until the LED blinks GREEN to indicate that cloudburst is
waiting to receive a MIDI Program Change message�
2 To save the current state of the pedal to the currently loaded preset
location, press and hold the footswitch for at least 2 seconds, until the
LED lights BLUE�
OR
To save the current state of the pedal to any preset location, send
the unit a MIDI Program Change on cloudburst’s currently selected
MIDI channel� For example:
• Send MIDI Program Change #10 to save the preset to the
corresponding memory location on the pedal�
• To recall this preset, send MIDI Program Change #10 from your
MIDI controller or sequencer�
To Next Page
Loading...
