Strymon cloudburst - MIDI Functionality; Configuring for MIDI Control

pg 20
MIDI Functionality
Configuring cloudburst to Use MIDI
Using MIDI unlocks a set of tools that can be used to load any of
cloudburst’s 300 preset locations using a suitable MIDI controller or
interface connected to the cloudburst EXP/MIDI jack� This requires a
Strymon MIDI EXP cable or a MIDI controller/interface, such as Strymon
Conduit, with at least one quarter-inch output�
NOTE: When using a Strymon MIDI EXP Cable, the MIDI OUT Mode must be
set to Off� (See page 24 for details�)
Please see strymon�net/support/cloudburst for a list of compatible
devices�
OR OR