Need help?Do you have a question about the Strymon Iridium and is the answer not in the manual?
Connect Iridium to a house PA or powered speaker for live performance.
Connect Iridium directly to a recording interface for studio use.
Connect headphones directly to Iridium for practice.
Explains specialized use cases like amp processing without cabs.
Selects one of three amp types and speaker cabinet IRs.
Adjusts drive, output volume, EQ, and room ambience.
Recalls saved settings and activates/deactivates processing.
Configures input signals and details connectivity ports.
Details EXP, USB, and power input ports.
Describes the front-panel headphone output for monitoring.
How to select and save room reverb sizes using the ON footswitch and ROOM knob.
How to adjust output volume without altering saved presets, useful for headphones.
Configures the pedal's output behavior (Amp Bypass, Cab Bypass, Normal).
Selects input headroom for instrument or line level sources.
Assigns expression pedal, footswitch, or MIDI functions to the EXP jack.
How to connect a MiniSwitch to toggle the Favorite preset remotely.
How to connect and configure an expression pedal for knob control.
How to connect and use the MultiSwitch Plus for preset selection and saving.
Details on connecting MIDI controllers via EXP jack.
How to set the EXP jack for MIDI digital mode.
How to select the MIDI communication channel for Iridium.
Configures the type of MIDI data sent from Iridium.
Selects whether Iridium responds to incoming MIDI Expression messages.
How to save current settings to any of Iridium's 300 preset locations using MIDI.
Explains how presets are grouped into MIDI banks.
Lists MIDI CC numbers for controlling various Iridium parameters.
Restores Iridium to its factory default state by erasing settings.
Highlights the main capabilities and technologies of the Iridium.
Lists technical details like impedance, A/D, DSP performance, and dimensions.
Specifies the required power adapter rating.
Lists registered trademarks associated with the product's components.
Summarizes how to adjust Room Size, MIDI Expression, and Level Trim.
Summarizes how to set Output Mode, Factory Reset, Input Level, and EXP Jack Mode.
Summarizes MIDI Channel and MIDI Output Mode settings.
Details of the impulse responses for the Round amp.
Details of the impulse responses for the Chime amp.
Details of the impulse responses for the Punch amp.
Illustrates signal flow for mono input signals.
Illustrates signal flow for stereo input signals.
Illustrates signal flow for summing stereo input to mono output.
Visual examples of various Iridium presets and their room sizes.
Outlines the product's warranty period, coverage, and exclusions.
Details liability limits and instructions for obtaining warranty service.
General| Power Source | 9V DC power supply (included) |
|---|---|
| A/D/A Conversion | 24-bit/96kHz |
| Impulse Response Length | 500ms |
| Type | Amp and Cab Simulator Pedal |
| Amps | Round (Fender Deluxe Reverb), Chime (Vox AC30TB), Punch (Marshall Plexi) |
| Cab IRs | 9 Built-in IRs; 3 per Amp |
| Inputs | 1 x 1/4" (instrument) |
| Outputs | 2 x 1/4" (stereo/mono) |
| MIDI | In, Out/Thru |
| USB | 1 x Micro-B |
| Bypass Switching | True Bypass |
| Power Requirements | 9V DC, 500mA |
| IR Loading | Via USB |
| Dimensions | 4.5" x 4" x 1.75" |
To Next Page
