IRIDIUM - Amp & IR Cab
pg 4
DIRECT
BOX
POWERED
FULL-RANGE
MONITOR(S)
HOUSE
PA SYSYTEM
Connect Iridium directly to a recording interface for great guitar tone
instantly without the need to set up an amp or microphones.
IN THE STUDIO
2
Connecting Iridium (cont.)
Connect headphones directly to Iridium to experience immersive
classic amp tones in a natural sounding room without an amp
.
Iridium can be used on its own or as part of a pedalboard.
• Place Iridium at the end of your signal chain to capture the sound
of the entire pedalboard connected to the front of an amp.
• Place Iridium before time-based effects for a different tonal
character if you prefer.
• Use headphones to check out a pedalboard that normally connects
to an amp by connecting its output(s) to Iridium.
AT HOME
ADDITIONAL TIPS FOR STAGE, STUDIO, AND HOME
3
DIRECT
BOX
POWERED
FULL-RANGE
MONITOR(S)
HOUSE
PA SYSYTEM
To Next Page
Loading...
