Need help?Do you have a question about the Strymon brigadier and is the answer not in the manual?
Sets delay time by tapping; holding results in infinite repeats.
Engages/disengages effect; holds to change bypass mode.
Standard 9V DC center-negative power input required.
Hold TAP/BYPASS while turning Bucket Loss knob to adjust repeat darkness/brightness.
Covers manufacturing defects for one year from purchase date.
Excludes damage from misuse, abuse, modification, storage, or natural disasters.
General| Power Source | 9V DC power supply (included) |
|---|---|
| Input Impedance | 1M Ohm |
| Bypass | True Bypass |
| Inputs | 1 x 1/4" (mono) |
| Outputs | 1 x 1/4" |
| Output Impedance | 1k Ohm |
| Power Requirements | 9V DC, 250mA |
| Digital Signal Processing | 24-bit A/D and D/A conversion, 32-bit floating point DSP |
| Controls | Mix, Repeats |
To Next Page
