pg 24
External Control
Using MultiSwitch Plus in Preset Mode
Selecting and saving Brig presets using MultiSwitch Plus�
NOTE: Footswitches A, B, and C on MultiSwitch Plus correspond to MIDI
Program Changes 1, 2, and 3�
1 Step on a switch that is not illuminated to recall the corresponding
preset�
2 Step on an illuminated switch to bypass Brig�
Saving Brig Prese
ts with MultiSwitch Plus
1 Dial in the sound that you would like to save as your preset on Brig�
2 Press and hold the Brig
FOOTSWITCH
for at least 3 seconds, until its
LED blinks GREEN
�
3 Press the A, B, or C MultiSwitch Plus footswitch to save the current
state of the pedal to the desired location�
To Next Page
Loading...
