pg 27
Configuring Brig to Use MIDI (continued)
STEP 1 SET EXP/MIDI JACK TO MIDI MODE
1 Press and hold the
FOOTSWITCH
for at least 2 seconds while powering
up Brig� Once the LED flashes RED, release the footswitch�
TIME VOICE MIX
FILTER MODREPEATS
hold (tap)
dBucket Delay
3205
multi
3005
2 Turn the MIX (EXP/MIDI JACK) knob clockwise until the LED is BLUE
(maximum) to select MIDI Mode�
NOTE: MIDI data is received on the TIP of the TRS connection of the EXP/
MIDI jack�
To Next Page
Loading...
