COMPADRE - Dual Voice Compressor & Boost
pg 22
Input Impedance
Output Impedance
Max Input Level
Compressor Signal/Noise
Bypass Switching
Dimensions
1 Meg Ohm
100 Ohm
+10 dBu
109 dB typical
Selectable True Bypass (electromechanical
relay switching) or ultra low-noise
Buffered Bypass
4.5” deep x 4” wide x 1.75” tall
(11.4 cm deep x 10.2 cm wide x 4.4 cm tall)
Use an adapter with the following rating: 9VDC center negative;
150mA minimum. Voltages higher than 9V can result in damaging the
pedal.
Specifications
Power Adapter Requirements
To Next Page
Loading...
