Strymon Flint - Respond;Ignore MIDI Expression

pg 13
Flint - tremolo & reverb
Live Edit Functions
Respond/Ignore MIDI Expression
When set to MIDI mode, this setting determines whether Flint will
respond to MIDI Expression CC# 100, values 0 (heel) to 127 (toe), to
control the knob settings in the same manner as a TRS Expression
pedal�
1 Press and hold the REVERB ON footswitch� Once both LEDs flash,
release the footswitch�
MIDI EXP
2 Set the position of the TREMOLO (MIDI EXP) type switch to select
whether Flint will respond to MIDI Expression CC #100� Both LEDs
will momentarily change color to indicate the current status as you
set the switch�
• On: BLUE (default) - Flint will respond to MIDI Expression�
• Off: RED - Flint will not respond to MIDI Expression�
3 Press the REVERB ON footswitch to exit and store your MIDI Expression
setting�
NOTE: The MIDI Expression setting is saved per Favorite setting or per MIDI
preset�