Strymon Flint - General Power Up Options

pg 40
Flint - tremolo & reverb
Power Up Modes Quick Reference
Global parameters and functions can be accessed via a power up proce-
dure� All power up functions persist through power cycles�
General Options
1 Press and hold the REVERB ON footswitch while powering up Flint�
Once both LEDs flash, release the footswitch�
2 Adjust the desired functions with the knobs and buttons noted below�
3 Press either footswitch to store your changes and exit power up mode�
INPUT LEVEL
See page 14
for an illustrated
description�
Turn INTENSITY knob - status shown on TREMOLO ON LED
• Instrument: GREEN (default)
• Line: RED
BYPASS MODE
See page 15
for an illustrated
description�
Turn MIX knob - status shown on REVERB ON LED
• True Bypass: GREEN (default)
• Buffered Bypass: RED
SPILLOVER MODE
See page 16
for an illustrated
description�
Turn DECAY knob - status shown on both LEDs
• Off: AMBER (default)
• ON: PURPLE
FACTORY RESET
See page 33
for an illustrated
description�
Turn SPEED knob from 0% to 100% and back two times -
status shown on TREMOLO ON LED