pg 6
Flint - tremolo & reverb
Rear Panel I/O and Control (cont.)
9VDC
Use the included power
supply or an adapter with the
following rating:
• 9VDC, center negative
• 300mA minimum
USB
Computer connection for MIDI
control as well as for perform-
ing firmware updates�
EXP / MIDI
Multifunction communication jack for external control of Flint’s features
and functions� Can be set to operate in one of the following modes� (See
“Configuring the EXP/MIDI Jack” on page 17 for details�)
Expression Pedal mode (see page 19)�
Favorite mode (see page 20)�
Tap mode (see page 22)�
MIDI mode (see “Configuring MultiSwitch Plus” on page 23 or
“Saving Presets in MIDI Mode” on page 30)�
To Next Page
Loading...
