pg 43
DIG - dual digital delay
Power Up Modes Quick Reference
Global parameters and functions can be accessed via a power up proce-
dure� All power up functions persist through power cycles�
General Options
1 Press and hold the ON footswitch while powering up DIG� Once both
LEDs flash, release the footswitch�
2 Adjust the desired functions with the knobs and buttons noted below�
3 Press either footswitch to store your changes and exit power up mode�
INPUT LEVEL
See page 17
for an illustrated
description�
Turn TIME knob - status shown on both LEDs:
• Instrument: GREEN (default)
• Line: RED
BYPASS MODE
See page 18
for an illustrated
description�
Turn MIX knob - status shown with ON LED:
• True Bypass: GREEN (default)
• Buffered Bypass: RED
SPILLOVER MODE
See page 19
for an illustrated
description�
Turn TONE knob - status shown on both LEDs:
• Spillover Off: AMBER (default)
• Spillover On: PURPLE
FACTORY RESET
See page 36
for an illustrated
description�
Turn TIME 2 knob from 0% to 100% and back two times -
status shown on both LEDs
To Next Page
Loading...
