Strymon DIG - Using Multiswitch Plus; Saving DIG Presets with Multiswitch Plus

pg 27
DIG - dual digital delay
External Control
Using MultiSwitch Plus
Selecting and saving DIG presets using MultiSwitch Plus�
Preset 1 Preset 2 Preset 3
NOTE: Footswitches A, B, and C on MultiSwitch Plus correspond to MIDI
Program Changes 1, 2, and 3�
1 Step on a switch that is not illuminated to recall the corresponding
preset�
2 Step on an illuminated switch to bypass DIG�
Saving DIG Presets with MultiSwitch Plus:
1 Dial in the sound that you would like to save as your preset on DIG�
2 Press and hold both footswitches on DIG until both the LEDs blink
GREEN�
3 Press the A, B, or C footswitch on MultiSwitch Plus to save the cur-
rent state of the pedal to the desired location�