pg 19
Deco - tape saturation & doubletracker
Power Up Modes
Configuring the EXP/MIDI Jack
1 Press and hold the TAPE SATURATION ON footswitch while power-
ing up Deco� Once both LEDs flash, release the footswitch�
2 Turn the LAG TIME (EXP/MIDI JACK) knob to select the function of
the rear panel’s EXP/MIDI jack� The DOUBLETRACKER ON LED will
change color to indicate the current status as you turn the knob�
• Expression Pedal mode: GREEN (default) - Allows continuous
control over any of the knobs in any direction with a standard TRS
expression pedal� (See page 21 for details�)
• Favorite mode: AMBER - Allows you to recall a Favorite setting
using a Strymon MiniSwitch� (See page 22 for details�)
• Tap mode: RED - Allows you to set the LAG TIME via tap tempo
using a Strymon MiniSwitch� (See page 24 for details�)
• MIDI mode: BLUE - Allows for the selection of three presets using
a Strymon MultiSwitch Plus� Full MIDI functionality is also avail-
able by sending MIDI Program Change messages via 1/4" TRS
MIDI connection using a Strymon Conduit or MIDI EXP cable� Up
to 300 presets are available via MIDI�
(See “Configuring MultiSwitch
Plus” on page 25 or “Saving Presets in MIDI Mode” on page 32�)
To Next Page
Loading...
