pg 16
Deco - tape saturation & doubletracker
Live Edit Functions
Respond/Ignore MIDI Expression
When set to MIDI mode, this setting selects whether Deco will respond
to MIDI Expression CC# 100 , values 0 (heel) to 127 (toe), to control the
knob settings in the same manner as a TRS expression pedal�
1 Press and hold the TAPE SATURATION ON footswitch� Once both
LEDs flash, release the footswitch�
2 Set the position of the VOICE (MIDI EXP) switch to select whether Deco
will respond to MIDI Expression CC# 100� Both LEDs will momentarily
change color to indicate the current status as you set the switch�
• Set the switch up to classic for On (default): both LEDs light BLUE
- Deco will respond to MIDI Expression�
• Set the switch down to cassette for Off: both LEDs light RED -
Deco will not respond to MIDI Expression�
3 Press either footswitch to exit and store your MIDI Expression setting�
NOTE: The MIDI Expression setting is saved per Favorite setting or MIDI
preset�
To Next Page
Loading...
