Strymon DECO - MIDI and Jack Options Setup

pg 43
Deco - tape saturation & doubletracker
Power Up Modes Quick Reference (cont.)
Global parameters and functions can be accessed via a power up proce-
dure� All power up functions persist through power cycles�
MIDI & Jack Options
1 Press and hold the TAPE SATURATION ON footswitch while power-
ing up Deco� Once both LEDs flash, release the footswitch�
2 Adjust the desired functions with the knobs and buttons noted below�
3 Press either footswitch to store your changes and exit power up mode�
EXP/MIDI JACK
MODE
See page 19
for an illustrated
description�
Turn LAG TIME knob - status shown on DOUBLETRACKER ON
LED
• Expression: GREEN (default)
• Favorite: AMBER
• Tap: RED
• MIDI: BLUE
MIDI CHANNEL
See page 29
for an illustrated
description�
Turn SATURATION knob - status shown on TAPE
SATURATION ON LED
• 1: GREEN (default)
• 2: AMBER
• 3: RED
• 4-16: BLUE (channel set by next received MIDI PC
message)
MIDI OUT MODE
See page 31
for an illustrated
description�
Turn TONE knob - status shown momentarily on both LEDs
• OFF: RED (default)
• THROUGH: BLUE
• ON CC PC OTHER: WHITE
• ON CC OTHER: GREEN
• ON PC OTHER: PURPLE
• ON OTHER: AMBER