Installation Instructions
For Showermate Shower
Booster Pumps
1.5 bar Single, 1.5 bar Twin, 2.0 bar Twin
INDEX . . . . . . . . . . . . . . . . . . . . . . Page No
Product Description . . . . . . . . . . . . . . . . 1
Application . . . . . . . . . . . . . . . . . . . . . . . 1
Storage . . . . . . . . . . . . . . . . . . . . . . . . . 1
Typical Installation . . . . . . . . . . . . . . . . . 2
Pump Location . . . . . . . . . . . . . . . . . . . . 3
Pipework . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pump Connections . . . . . . . . . . . . . . . . . 6
INDEX . . . . . . . . . . . . . . . . . . . . . . Page No
Electrical Installation . . . . . . . . . . . . . . . . 10
Commissioning . . . . . . . . . . . . . . . . . . . . 13
Maintenance . . . . . . . . . . . . . . . . . . . . . . 14
Technical Specification . . . . . . . . . . . . . . 16
Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Trouble Shooting Guide . . . . . . . . . . . . . 17
Environment Protection . . . . . . . . . . . . . 17
Please leave this instruction booklet with the pump as it
contains maintenance and safety information.
PRODUCT DESCRIPTION
Electric motor driven single or double-sided peripheral pump complete with an
automatic control system, consisting of flow switches and electronic controls.
APPLICATION
Showermate pumps are designed for pressure boosting applications in vented stored
water systems, inlet pressures to the pump and ambient temperatures must not exceed
the values given in the technical specifications.
This pump set must not be used for any other application without the
written consent of Stuart Turner Limited and in particular must not be
connected directly to the mains water supply.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
STORAGE
If this pump is not to be installed immediately on receipt, ensure that it is stored in a dry,
frost and vibration free location in its original packaging.
To Next Page
General
