Setting up the Desk All system relevant settings of the Vista desk are configured in the D950Sys-
tem.ini file. With a new ordered Vista Mixing System these settings are
already configured correctly. This section is only to explain the single lines
in the file that are important for the correct configuration:
[d950systeminfo]
I sBridgeActive=Yes
this must be set to Yes
IsScoreUsed=No
IsSpiderCoreUsed=No
IsPCCoreUsed=Yes
this must be set toYes
IsD19Active=No
IsD21Active=No
IsD23Active=Yes
this must be set to Yes
[Mixercloud]
CloudId = 1
the Cloud Id defines the whole mixing system
NodeId = 10
here the Node Id of the mixer must be set - different from all other nodes
NodeName = “Vista X Desk”
the name of the desk can be entered here
ReceivePort = 3000
the default port for the mixercloud is always 3000
SendPort = 3000
the default port for the mixercloud is always 3000
UseMulticast = Yes
this must be set to Yes
MulticastGroup = 239.255.42.1
this is the default address for the Mixercloud
Interfaces = “LAN 2”
Name of network interfaces to be used for communication
AnnounceActive = Yes
the default setting is Yes
AnnouncePeriodMs = 500
the default setting is 500
NetworkExpirationTimeMs = 2000
the default setting is 2000
LiveUpdateIntervalMs = 20
the default setting is 2000
LiveUpdateSize = 5000
the default setting is 5000
SyncUpdateIntervalMs = 1000
the default setting is 1000
SyncUpdateSize = 20000
t
he default setting is 20000
[IOCloud]
CloudId = 1
defines the whole mixing system and is the same Id as the mixer cloud
NodeId = 10
the Node Id of the mixer as set above in mixer cloud
NodeName = “Vista X Desk”
v
the name of the desk as above in mixer cloud
ReceivePort = 3001
the default port for the IOCloud is always 3001
SendPort = 3001
the default port for the IOCloud is always 3001
UseMulticast = Yes
this must be set to Yes
MulticastGroup = 239.255.23.1
t
his is the default address for the IOCloud
Interfaces = “LAN 2”
Name of network interfaces to be used for communication
To Next Page
Loading...
