Studer OnAir 2500 - Onair 2500 Main Features; Inputs; Outputs

11
OnAir 2500 Main Features:
• Ergonomic, easy to learn “Touch’n’Action” user interface
• Complete system overview and fast parameter access via
fader screens
• 2 master buses PRG A, REC
• 8 weighted stereo mix-minus buses congurable as AUX
sends
• 2 AUX stereo buses
• 8 assignable inserts (stereo) plus analogue mic inserts
• Each Channel with:
• 4 band parametric EQ
• Limiter, Compressor, Expander, Gate
• De-Esser
• Mic Inputs with High Pass Filter
• One PFL circuit
• Integrated PFL speaker in chassis
• External PFL function (e.g. for playout system)
• Audition bus
• CR monitoring with quick listening function on all inputs
and outputs
• One independent studio monitoring/talkback circuit
• Integrated talkback microphone
• Different audio I/O modules as option by D21m series
extension
• Congurable control signals (GPIOs)
• All buttons freely assignable
• Snapshots, user management, user logins
• Graphical user interface with colour TFT touch screen
• Interface to radio automation system(s)
• Remotely controllable via remote GUI or Probel
protocol
• Redundant power supplies
• Input and output router with graphical display
• Fixed Frame version for easy and fast installation
• Completely adaptable to customer needs
• I/O sharing of audio sources
Inputs
- 6x Mic XLR
- 4x Stereo line XLR
- 8x Stereo AES/EBU with Input SRC on D-Type
- ADAT1 (HCS 200/230μ) (for studio monitoring with 1.943.444 or
1.943.447)
- ADAT2 (POF 980/1000 μ Fiber Wire) or Firewire IEEE-1394
- 1x MADI with 56 IN optical. AUX connector for redundant wiring
- 1x TB mic on desk
Outputs
- 4x Stereo Line XLR
- 4x Stereo Line D-type
- 1x Stereo CR Loudspeaker
- 8x Stereo AES/EBU D-Type
- 1x DJ Headphone (2 connectors)
- 1x GUEST Headphone
- 1x PFL speaker on desk
- 1x ADAT1 (for Studio monitoring)
- 1x ADAT2 or Firewire (IEEE-1394)
- 1x MADI with 40 OUT, AUX connector for redundant wiring