When the user try to change scenes or programs with locked memory.
The function can not be activated because the current program is empty. For example: COPY PROG-TO
button.
The function can not be activated because the programs are empty: for example: COPY PROG button.
When the user try to copy a program on itself.
A value out of range. For example: Program 101
The user digit OK (F1) or ENTER without input a value
Pressing SHAPES button not spots can work with the selected shape.
The function can not be activated because the spots have not been selected. For example: X/Y INV button.
When the user try to select a patch in which the total of the parameters of the spots is bigger that 512.
The controller has found inconsistency on data of memory, caused by problems of power supply.
22
To Next Page
Loading...