Studiologic SL-760 - SECTION 7. Appendix and Troubleshooting; Troubleshooting Common Problems

36. Fretless Bass
37. Slap Bass 1
38. Slap Bass 2
39. Synth Bass 1
40. Synth Bass 2
41. Violin
42. Viola
78. Shakuhachi
79. Whistle
80. Ocarina
81. Square
82. Sawtooth
83. Calliope
84. Chiffer
85. Charang
121. Guitar Noise
122. Key Click
123. Seashore
124. Birds
125. Telephone
126. Helicopter
127. Applause
128. Gunshot
SECTION 7.
Appendix:
TROUBLE SHOOTING
GUIDE
PROBLEM Keyboard does not power up?
POSSIBLE SOLUTIONS • Make sure the power supply is connected to the wall outlet
POSSIBLE SOLUTIONS • Make sure the power supply is properly connected to the keybpard^
PROBLEM Keyboard does not seem to be sending MIDI notes to my modules?
POSSIBLE SOLUTIONS Make sure you are not in the EDIT MODE.
POSSIBLE SOLUTIONS Make sure the ZONE switch of the ZONE you are trying to play is on. .
POSSIBLE SOLUTIONS Make sure the MIDI channel you are playing on is enabled on your sound source.
POSSIBLE SOLUTIONS Make sure your sound modules audio outputs are connected properly to your mixer or amp.
Make sure your mixer amp or sound system is on and the volume settings are up.
PROBLEM I have made changes in EDIT MODE but the changes do not seem to be present when I
return to PLAY MODE?
POSSIBLE SOLUTIONS • This can happen very easily. When you enter EDIT MODE make sure you are editing the ZONE
that you were playing before hitting EDIT. When entering edit mode you will be on the ZONE
you last edited not necessarily the ZONE you have on in PLAY MODE.
PROBLEM I know I am sending MIDI to my module because I see the MIDI indicator light up when
I play but I hear nothing?
POSSIBLE SOLUTIONS • Make sure the VOLUME PEDAL is depressed forward to send full volume!
POSSIBLE SOLUTIONS • Make sure your sound modules audio outputs are connected properly to your mixer or amp.
POSSIBLE SOLUTIONS • Make sure your mixer amp or sound system is on and the volume settings are up.
PROBLEM The SUSTAIN PEDAL does not seem to work?
POSSIBLE SOLUTIONS • Make sure it is plugged in properly to the SUSTAIN PEDAL INPUT
POSSIBLE SOLUTIONS • Make sure the SUSTAIN PEDAL is enabled for the ZONE you are playing
PROBLEM The SUSTAIN PEDAL seems to work in reverse?
POSSIBLE SOLUTIONS • Power the keyboard down. With the SUSTAIN PEDAL plugged in to the SUSTAIN PEDAL INPUT
power the keyboard up. This will cause the SL-SL-760 to sense the proper polarity setting
for the type of pedal you are using and adjust properly.
PROBLEM The WHEELS or AFTERTOUCH do not seem to work?
POSSIBLE SOLUTIONS • Make sure they are enabled on the ZONE you are playing
POSSIBLE SOLUTIONS • Make sure they are enabled in the Patch in your module you are sending to.
PROBLEM I am playing a ZONE that I know is on but nothing is happening?
POSSIBLE SOLUTIONS • Make sure you are playing within the SPLIT range of notes set up for that ZONE
POSSIBLE SOLUTIONS • Make sure that the MIDI channel is set correctly.
POSSIBLE SOLUTIONS • Make sure the VOLUME PEDAL is depressed and all other volume setting are up.