32
1
2
EN/06.2021/G23 © STULZ GmbH – all rights reserved
minispace cw original instructions
5.5 Electrical connection
Make sure that the power supply corresponds to the indications on the rating plate and that the tolerances
To determine the asymmetry of phase measure the voltage difference between the phase conductors
DANGER
Mortal danger by electric hazard
NOTICE
NOTICE
protection against bodily harm during operation of the unit or frequency converters.
ESD NOTE
without taking care of protective ESD
measures.
The connection bolt provided for this purpose is marked with this symbol:
Electronical components:
are provided with rubber grommets. If the rubber
damaged.
To Next Page
Loading...
