22 EN/06.2021/G23 © STULZ GmbH – all rights reserved
minispace cw original instructions
5.4 Water piping connection
External water circuit
mesh strainer at the water inlet of the A/C unit.
Connecting the A/C unit to the external system
The water connections end with an external thread.
system and the A/C unit.
lines to the unit.
NOTICE
Water remaining from the test run may escape when the protective caps
are removed.
heat and the formation of condensate at the pipes.
NOTICE
components.
Connection with external thread
DANGER
Mortal danger by electric hazard
Do not connect the power supply until the installation work has been completed. Secure the
main switch against being switched on again.
To Next Page
Loading...
