E/0204/39/16
1. Unpacking and Inspection
STULZ products are shipped ex-works. All units have been individually inspected in all their
parts and carefully packaged.
Immediately inspect the unit upon receipt, making sure it has been shipped in its proper position.
Note improper shipment on the shipping document.
We recommend you accepting merchandise subject to inspection.
Check for damage and, if any, note this immediately on the shipping document. Remove packing
and check that the exterior casing is not scratched, marked or have signs of blows and that no
components are missing and that there are no traces of oil. Before throwing the packaging away
check that it does not contain documents or parts of the machine.
Any damage that is encountered must be notified to the carrier by registered letter within 8 days of
receipt. The carrier is responsible for any damage caused during shipment. STULZ is not responsible
for damage caused to the merchandise by the shipper but will do all in its power to assist customers
in these situations.
N.B. This product may not be returned without prior written approval by STULZ.
For any assistance please contact your local STULZ partner.
NOTE: If installation of the product is not required immediately or the product needs
to be onforwarded to its final destination, replace it in its packing, after inspecting it,
and store it in a safe place.
UP
UP
UP
WARNING! As an environmental concern, we recommend to recycle the
packing cartons and to separate them from any plastic.
To Next Page
Loading...
