PAGE 23 STUV 6 | SPECIFICATIONS & MANUFACTURER INSTALLATION GUIDE
^
OPERATION
What you should burn
• Untreated, air dried hardwood
• Split logs with a humidity content of less than 20%
Do not burn
• Trash
• Painted plastic
• Coated or preservative treated wood
• Waste or black coal
• Inflammable liquids
• Fire gels
• Moist wood with a residual humidity content of more than 20% (this may cause soothing of the chimney).
NOTE:
Australian hardwood is extremely dense and
we highly recommend using double split logs
or “pizza oven” logs for optimum operation.
Smaller logs will burn more cleanly and
generate more heat making for a more
efficient and enjoyable combustion.
WARNING:
• The Maximum load capacity of the STUV 6 is 4 kg of Hardwood/hour.
• Overloading the unit may result in damaging the heater and voiding the warranty.
• Misuse may lead to unhealthy and environmentally harmful emissions.
• Misuse may impact integrity of the heater and will void any warranty or guarantee.
• Burning only seasoned hardwood helps to protect the environment and lower emissions.
The first time you light the fire, some fumes and smells may be released: make sure the room is well ventilated.
To Next Page
Loading...
