EasyManua.ls Logo

Style selections SSFBD28T - TO TURN OFF GAS TO APPLIANCE; MANUAL LIGHTING PROCEDURE

Style selections SSFBD28T
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
TO TURN OFF GAS TO APPLIANCE
Shut off heater.
Turn Control Knob clockwise
to the OFF position. Do not force.
MANUAL LIGHTING PROCEDURE
1. Remove screen by lifting and pulling forward.
2. Follow steps 1 through 5 under Lighting Instructions.
3. With control knob in PILOT position, strike match, and hold near pilot. Press in control
knob; pilot should light.
4. Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release
control knob.
5. Make sure the heater screen is in place before operating heater.
Fig. 19 - Control Knob Position
Ignitor Control Knob

Related product manuals