PAGE 100
700-3 SERIES - BASE UNITS
» Temperature Log Recall Mode
(Compartment Temperature History Only)
1. Unit must be ON
2. Press desired
WARMER & UNIT ON/OFF keys simultane-
ously, then release both keys
NOTE: After performing the above key strokes (depending on
COLDER key chosen), the following will appear on the LCD.
Temperatures shown are for reference only, actual temperatures
may vary.
3388
SERVICE (Illuminated)
0011
2 hour compartment temperature average (at left) with
index number. Number 1 is most recent 2 hour period.
NOTE: SERVICE is always illuminated at first index.
- Press WARMER key in multiple keystrokes to toggle up
through indexes, from 1 to 168.
3366 116688
2 hour compartment temperature average (at left) with
index number. Number 168 is oldest recorded 2 hour peri-
od.
- Press COLDER key in multiple keystrokes to toggle down
through indexes, from 168 to 1.
NOTE: Possible event indicators during Temperature Log Recall
Mode is covered later. Temperature Log Recall Mode ends 15
seconds after last key stroke.
To Next Page
Loading...
Need help?
General
