To Next PageTo Next Page
Need help?Do you have a question about the Sub-Zero 611-2 and is the answer not in the manual?
General| Type | Built-In Refrigerator |
|---|---|
| Height | 84 inches |
| Cooling System | Dual Refrigeration |
| Finish | Stainless Steel |
| Energy Star Rated | Yes |
| Product Type | Refrigerator |
| Door Style | French Door |
| Temperature Control | Electronic |
| Door Swing | Reversible |
| Energy Star Certified | Yes |
| Depth | 24 inches |
| Shelves | Adjustable glass shelves |
| Width | 30 inches |
Overview of the manual's purpose, safety warnings, and technical assistance contact.
Summarizes warranty information and provides descriptions for various 600-2 Series models.
Covers common installation issues, unit leveling, door alignment, and sealing.
Procedure for installing anti-tip components to secure the unit to wall studs.
Details on leveling the unit and adjusting doors for proper alignment and sealing.
Instructions for adjusting freezer drawers and installing/adjusting door panels.
Defines basic electronic control system terms and components.
Explains control board layout, summary table, and control panel configuration.
Covers switching unit ON/OFF and adjusting compartment set-points.
Details on icemaker, door ajar alarm, and accent lighting system controls.
Explains power supply, lighting system, and temperature monitoring functions.
Covers regulating compartment temperatures and managing defrost cycles.
Explains how the system indicates service needs and lists error codes.
Details on entering Diagnostic Mode, Component Activation, and clearing codes.
Explains the temperature history storage and recall modes.
Provides guidelines for working with HFC-134a refrigerant and general service rules.
Outlines repair procedures for common sealed system problems.
Illustrates the basic sealed system components and refrigerant flow.
Details fan bracket to blade hub spacing measurements for various models.
Explains the icemaker system operation and describes its individual components.
Illustrates the typical icemaker cycle of operation through schematics.
Provides procedures for manually stopping, starting, and adjusting the icemaker.
Details removal and access for exterior parts like grilles and handles.
Instructions for removing and adjusting interior refrigerator components.
Covers removal and adjustment of interior freezer components for various models.
Procedures for accessing mechanical components in the lower and upper compressor areas.
Details the removal procedures for sealed system components like filter-driers and compressors.
Explains how to use error codes and lists common error codes with test actions.
Provides a systematic approach to diagnosing common unit problems.
Presents tables for normal operating pressures and temperature/pressure correlations.
Details procedures for testing membrane switch and ribbon cable continuity.
Provides technical specifications for various models including charge, pressures, and components.
Presents detailed wiring diagrams and schematics for different 600-2 Series models.
