Need help?Do you have a question about the Sub-Zero 611/S and is the answer not in the manual?
General| Type | Built-In Refrigerator |
|---|---|
| Width | 36 inches |
| Height | 84 inches |
| Cooling System | Dual Refrigeration |
| Temperature Zones | 2 |
| Energy Star Certified | Yes |
| Product Type | Refrigerator |
| Door Style | French Door |
| Defrost Type | Automatic |
| Energy Star Qualified | Yes |
| Ice Maker | Yes |
| Water Dispenser | No |
| Finish | Stainless Steel |
| Depth | 24 inches |
Details safety labels and precautions to avoid injury and product damage.
Contact information for Sub-Zero service department for questions and support.
Defines terms and describes components of the electronic control system.
Describes how the system monitors, displays, and regulates compartment temperatures.
Illustrates customer-viewable error indicators on the LCD and their causes.
Step-by-step guide to initiating and using diagnostic mode for troubleshooting.
Explains using temperature readings in diagnostic mode to troubleshoot the sealed system.
Provides general rules and procedures for working with 134a refrigerant.
Key guidelines for safe and effective service when handling 134a refrigerant.
Lists common sealed system problems and their corresponding service procedures.
Illustrates basic sealed system components and explains refrigerant flow.
Overview of the MidSouth icemaker, its components, and operation cycle.
Descriptions and functions of each component within the icemaker assembly.
Illustrates icemaker cycle phases with electrical schematics and component positions.
Removing filter-drier, compressor, condenser, evaporator, and heat exchanger.
Troubleshooting warm or cold compartment temperatures and related errors.
Troubleshooting control board, membrane switch, and indicator light errors.
Troubleshooting lights, noise, door alignment, and icemaker problems.
Provides normal operating pressures and troubleshooting indications for sealed systems.
To Next Page
