Site Preparation 7
subzero.com/specs
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. Your design may
n
ecessitate moving the unit back or cabinets forward to achieve
a
flush fit. This will require a minimum rough opening depth of
25" (635).
25" (635)
O
PENING
D
EPTH
A
OPENING WIDTH
25" (
635)
OPENING DEPTH
B
OPENING
H
EIGHT
TOP VIEW
FRONT VIEWSIDE VIEW
Opening Dimensions
INTEGRATED MODELS
Opening Dimensions AB
IC-27R and IC-27FI 27" (686) 81" (2057)
700TR, 700TFI, 700TCI 27" (686) 80" (2032)
736TR, 736TFI, 736TCI 36" (914) 80" (2032)
700BR, 700BF(I), 700BC(I) 27" (686) 34
1
/2" (876)
To Next Page
Loading...
