Need help?Do you have a question about the Sub-Zero 700-3 BASE and is the answer not in the manual?
General| Type | Built-In |
|---|---|
| Product Type | Refrigerator |
| Series | 700 |
| Width | 36 in |
| Height | 84 in |
| Depth | 24 in |
| Cooling System | Dual Refrigeration |
| Finish | Stainless Steel |
| Energy Star Certified | No |
| Ice Maker | Yes |
| Water Dispenser | No |
| Door Bins | Adjustable |
| Interior Lighting | LED |
| Shelves | Adjustable Glass |
Details product safety labels, signal words (WARNING, CAUTION, NOTE), and precautions.
Covers common installation issues like leveling, door alignment, and sealing for 700-3 Series units.
Detailed steps for leveling the unit, including kickplate removal and front/rear leveler adjustment.
Explains how the unit regulates freezer temperature, including fan and compressor operation.
Details how the unit regulates refrigerator temperature and controls the air baffle.
Explains how the unit regulates refrigerator temperature for the 700BR-3 model, including fan control.
Describes the adaptive defrost process, including intervals, duration, and related components.
Explains the off-cycle defrost method for the 700BR-3 model, focusing on fan and compressor control.
Illustrates common error indicators displayed on the LCD and their associated problems.
Procedure to initiate Diagnostic Mode for observing real-time temperature readings from all thermistors.
Explains indicators like 'EE', 'Sr', and 'EC' observed during Diagnostic Mode and their meanings.
Procedure to energize cooling system components for 5 minutes to check voltage readings.
Details the temperature history data storage system and how to access it via Recall Mode.
Procedure for configuring the main control board for the specific model it's installed into.
Allows verification or reconfiguration of the main control board's model code.
Provides general rules and procedures for servicing the HFC-134a refrigerant sealed system.
Lists essential guidelines for using dedicated equipment and handling 134a refrigerant safely and effectively.
Outlines service procedures for common sealed system problems like leaks, contamination, and restrictions.
Explains the compressor's fundamental role in creating pressure differences within the sealed system.
Details how the condenser dissipates heat from the refrigerant gas, changing it to a liquid.
Highlights essential safety warnings and cautions for unit removal and component access.
Detailed steps for removing the compressor, including electrical and tubing disconnections.
Provides guides for troubleshooting common problems experienced by 700-3 Series Base units.
Tables correlating pressures with possible sealed system problems.
Table correlating evaporator temperatures with sealed system low-side pressures for reference.
Wiring diagram for the 700 BC/BCI-3 model prior to serial #2300444.
Wiring schematic for the 700 BC/BCI-3 model prior to serial #2300444.
Wiring diagram for the 700 BC/BCI-3 model starting with serial #2300444.
Wiring diagram for the 700BR-3 model.
Wiring schematic for the 700BR-3 model.
Wiring diagram for the 700 BF/BFI-3 model.
Wiring schematic for the 700 BF/BFI-3 model.
To Next Page
